CapoVelo.com - | Pioneer Pedaling Monitor Sytem
8036
post-template-default,single,single-post,postid-8036,single-format-standard,no_animation

Pioneer Pedaling Monitor Sytem



http://www.youtube.com/watch?v=pqbKqoS6a2w

http://www.youtube.com/watch?v=l9Ys1SwF6E0

” cloud and can be displayed using graphs and maps tailored to suit individual goals.

Improvements in training methods can be designed through the analysis of ride data from training and races. Subsequent uploads allow for comparison and accurate measurement of the resulting improvements in the athlete’s ability.

Google Chrome ver.17 or later

Mozilla Firefox ver.12.0 or later

Apple Safari ver.5.1 or later

Opera ver.12.01 or later

Microsoft Internet Explorer ver.9

Google Chrome ver.17 or later

Mozilla Firefox ver.14.0.1 or later

Apple Safari ver.5.1.7 or later

Opera ver.12.01 or later

Weight 126g Dimensions 70mm(W) X 85mm(H) X 21.5mm(D) Connector miniUSB Water-resistance IPX6 Communications system

(sensors) ANT+™ *1 standard Positioning system

(latitude/longitude) GPS Positioning system

(altitude) Atmospheric pressure sensor Display QVGA 320×240 pixel, 2.2” Touch panel (Resistive membrane type) Built-in flash memory 8GB (6GB for user use) Guaranteed operational

temperature range -10 to 50°C Power supply voltage DC 5V Battery type Lithium-ion battery Battery

operating time *3 Approximately 12 hours (brightness 5) Charging time Approximately 4 hours (normal charge);

Approximately 3 hours (fast charge) Accessories Bracket, bolt, USB cable, strap, mounting guide/user manual, warranty

*1 ANT+™ is a low-powered wireless communications standard using the 2.4GHz range.

*2 Loss component

This is the power applied in the direction opposite to crank rotation

and the power applied in the radial direction. 

*3 The battery operating time may decrease depending on the operating conditions.

*4 Compatibility with a specific Bottom Bracket does not guarantee compatibility with all frames using that Bottom Bracket. Please consult you dealer.

• Specifications and design are subject to change without notice.

・Right transmitter:

 60.7 mm(W) × 46.9 mm(H) × 21.6 mm(D)

・Junction box, Strain gauge unit cover:

 63.3 mm(W) × 47.2 mm(H) × 9.9 mm(D)

 99.4 mm(W) × 48.2 mm(H) × 14.6 mm(D)

 φ57.0 mm × 3.5 mm Water-resistance IPX6 Communications system

(sensors) ANT+™ *1 standard Battery CR2032 Battery operating time *3 Approximately 200 hours

(normal temperature) Guaranteed operational

temperature range -10 to 50°C Accessories Magnet ring, Magnet ring attachment for Hollowtech II, Batteries (CR2032), Cable ties, Phillips-head screws, User’s Manual, Important Information for the User, Warranty Card Implemented crank SHIMANO FC-9000

Compatible Bottom Brackets

The Pedaling Monitor is compatible with 4 types of Bottom Bracket *4; SHIMANO HOLLOWTECH II, BB86, BB30 and PF30. For HOLLOWTECH II the standard SHIMANO Bottom Bracket may be used, but for BB86, BB30 and PF30 the Bottom Bracket must be replaced with our specific Bottom Bracket Option Parts. These Option Parts are available with Steel or Ceramic Bearings.

Option Parts (Bottom Bracket) BB86

Pedaling Monitor Sensor Bottom Bracket Adapter

(For BB86/Steel Bearings)

SGY-BB86

Pedaling Monitor Sensor Bottom Bracket Adapter

(For BB86/Ceramic Bearings)

SGY-BB86C BB30

Pedaling Monitor Sensor Bottom Bracket Adapter

(For BB30/Steel Bearings)

SGY-BB30

Pedaling Monitor Sensor Bottom Bracket Adapter

(For BB30/Ceramic Bearings)

SGY-BB30C PF30

Pedaling Monitor Sensor Bottom Bracket Adapter

(For PF30/Steel Bearings)

SGY-BBPF30

Pedaling Monitor Sensor Bottom Bracket Adapter

(For PF30/Ceramic Bearings)

SGY-BBPF30C

Leave a reply
Share on